I have a top loader Kenmore washer that during the sping cycle it keeps coming unbalanced and rattling real bad.. Ive tried leveling it but it keeps doing it its less than a year old any suggestions?

Appreciated,

Dustin Jobe

How did you level it? They usually have self adjusting back legs and can be adjusted by lifting and letting down the back of the washer

Quote:

---

Originally Posted by hvacservicetech_07

How did you level it? they usually have self adjusting back legs and can be adjusted by lifting up and letting down the back of the washer

---

Thanks for the speedy response! I ued the legs on the front and the back and used a 4 foot level to make sure that it was level while doing it... I turn the sping cycle back on and its good for about 4-5 seconds then it makes a little sound and then starts making a racket!

You may be able to adjust the legs of the washer if you haven't akready done so

I have already adjusted the legs.. and it still keeps coming unbalanced in the sping cycle..

Does the washer feel solid to the floor when you try to move it back and forth?