HEY ! Whilst using the toilet last night the saniflo system stopped making its usual noise and stopped now it won't flush properly( the bowl just fills with water). Ive checked the fuse which is okay. But now I need to take the whole toilet out to see what's wrong, and I haven't a clue where to start, if anyone knows, could you please give a step-by-step discription of how to empty the water... and anything else that may come out of the thing :eek:!! Thank-you caroline...

Sounds like your problem's in the pump or float switch. I would check the float switch first and then track power back to the pump. Do not drain anything more into the pit and open the lid and bucket and dip out the water in there to get at the switch. Good luck, Tom