Mandrake 10 modem configuration
Hi team I'm new to this board so you will have to bare with me if I make a few mistakes .
My Q I'm on dial up.
And I have mandrake 9.1 and 10.
And they will find all hardware drivers but the modem driver.
I understand this applys to all linux products when you use dial up.
I know mandrake 9.1 the modem driver has to be extracted from the disk through the konsole application.
Does any one know the command line to extract the modem driver
For mandrake 10.
I've had this disk for 3-4 months.
And it is quite frustrating .
Windows finds all drivers at boot up through plug and play.
A would appreciate any advice.
Hope I've explained this as best I could
Thanks in advance
lani