I am working on another B&S 14.5HP OHV engine and I went to drain the oil and gasoline had gotten into the engine block. Any suggestions on how this happened and what can be done to fix the problem. Thanks.
![]() |
I am working on another B&S 14.5HP OHV engine and I went to drain the oil and gasoline had gotten into the engine block. Any suggestions on how this happened and what can be done to fix the problem. Thanks.
Debris in needle holding float open, hole in float, bad needle valve, bad seat.. . Drain and try again, if it continues check the previous.
Don
All times are GMT -7. The time now is 02:14 PM. |