Hello all,

My name is Scott I live in Alabama. About a year ago we had a new heat pump and air handler installed in our house every thing has been great until now when I tried to turn on the air I receive a bunch of different carracters on the digital screen of thermostat and the outside unit does not respond (it is a Payne) what could cause this? It has been working great until now. The air handler is responding to the thermostats commands being if I set the fan to run it comes on if I set the thermostat to cool, heat, or auto nothing?? Pleas help. Thank you in advance.

Scott

Could be many things
Check to make sure the power is on to both the inside units and you have the correct voltage for both. Use a meter to test.
If the thermostat has batterys check or replace them.
You might ave been hit with a powersurge from your utility company.
Cycle the breakers all the way off then turn back on.

If none of this works call for service.

Quote:

---

Originally Posted by ssupplypup

Hello all,

My name is Scott i live in alabama. about a year ago we had a new heat pump and air handler installed in our house every thing has been great untill now when i tried to turn on the air i recieve a bunch of different carracters on the digital screen of thermostat and the outside unit does not respond (it is a Payne) what could cause this? It has been working great untill now. The air handler is responding to the thermostats commands being if i set the fan to run it comes on if i set the thermostat to cool, heat, or auto nothing??? Pleas help. Thank you in advance.

Scott

---

If the screen had a bunch of numbers and letters and then shows E2 you have a low voltage short. (sounds like at the reversing valve)