My Kenmore Dishwasher model 587.15072 started acting weird. Yesterday the hot dry (lock) and high scrub lights were on by themselves & when we opened the door the washer was heating but no water. We reset the power by flipping the breaker and then both of those lights were on but could not press any other buttons. Hit a bunch of buttons and finally got the wash to work. Then towards the end of the cycle ALL the lights were flashing. Now when we reset the breaker none of the lights or buttons work (although it looks like all of them may be on dimmly. Wash will now not work. It there a "reset" we can do?
Thanks.

Quote:

---

Originally Posted by dwheaton

My Kenmore Dishwasher model 587.15072 started acting weird. Yesterday the hot dry (lock) and high scrub lights were on by themselves & when we opened the door the washer was heating but no water. We reset the power by flipping the breaker and then both of those lights were on but could not press any other buttons. Hit a bunch of buttons and finally got the wash to work. Then towards the end of the cycle ALL the lights were flashing. Now when we reset the breaker none of the lights or buttons work (although it looks like all of them may be on dimmly. Wash will now not work. It there a "reset" we can do??
Thanks.

---

Try to reset it again by cutting the circuit breaker to the dishwasher for approximately 15 to 20 minutes... if that doesn't work, you need a technician, the circuit board may be defective... verify your user's guide to see how long the warranty is on that part... it is quite expensive... and if you purchased an extended warranty on it... KUDOS! Good luck!