I have a 2011 Harley Davidson Ultra Classic. I installed new chrome switch housing and caps. I turned on the bike to check the switches work properly. All the switches did on both sides but both turn signals do not. I removed the signals out of the housings and they work. Ire-installed the switches and again they do not work. Looking for a solution!!

Check for voltages at plug out of housing, replace housing and check plug voltages again. Maybe have Signals on while assembling?

Was fixing a Tube TV with No Picture, pulled the back off, it worked fine, Put Back of TV back on, blacked out again, Put back on with picture on, saw it slowly black out dut to a Speaker that the Owner added, The Magnet was so strong, it Blacked out the Picture. Just a Story, You probably don't have a Magnet Problem?

Good Luck