Fuse not blown on board
Emergency shut off is to the on
Thermostat is calling for ac
Blower kicks on
Outside nothing no clicking or anything
No outside fan
If you push the contacter outside
It kicks on but only if engaged
Have a goodman furnace
Has 5 red lights flashing
But confused with that because trying
To run ac not the furnace
Checked the drain not clogged
So float sinsor I doubt

Other
Sometimes here recently
The blower just stays on

Time to call an HVAC tech to have it checked out.

If you cannot correct the problem with a simple power reset at the breaker, then call a tech for a proper check. There is a very good reason why these guys have to be certified by logging a certain amount of hours in an approved program. Do you have an ohm meter and know how to use it?

Call someone that does.

It is probably the contact that you are holding in. it has failed. If you do not know about electric codes and wiring call someone! Safe your life.


That contact is a common failure item.