Kenmore model # 106.4442*600 the water dispenser made some loud rattling noise, and stopped coming out. Now getting 2 flash code repeating.

It sounds like the inlet valve at the bottom of the refrigerator. https://www.askmehelpdesk.com/attach...id=48763&stc=1
These valves all hook up differently. You have a line going into the valve and one coming out and going to the despenser. It is best to get a new one from Home Depot or Lowe's and get the fittings to hook it up. Tighten up just snug; overtightening the fittings on the plastic tubing will ruin it and cause a leak. Get one with a 120 volt coil, but remove old unit and look carefully at coil voltage as some may have a different voltage. If you cannot find it go to an ac/refrigeration supply house or buy off internet. Inspect entire length of line to look for any problems.