Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Appliances (https://www.askmehelpdesk.com/forumdisplay.php?f=157)
-   -   Kenmore Ulta wash 665.16732000 (https://www.askmehelpdesk.com/showthread.php?t=82992)

  • Apr 15, 2007, 07:56 PM
    bigdaddy1713
    Kenmore Ulta wash 665.16732000
    Hi there our dishwasher quit this week and I need some help. It seemed to quit mid cycle and now the "washing" light is flashing. I've tried turning the power off and back on and nothing seems to work. I of course don't have the manual and Sears likes to keep everything a secret and therefore don't have e-manuals so I am looking for any advise.
    Thanks
  • Apr 15, 2007, 08:57 PM
    CAHummingbird
    Quote:

    Originally Posted by bigdaddy1713
    Hi there our dishwasher quit this week and I need some help. It seemed to quit mid cycle and now the "washing" light is flashing. I've tried turning the power off and back on and nothing seems to work. I of course don't have the manual and Sears likes to keep everything a secret and therefore don't have e-manuals so I am looking for any advise.
    Thanks

    Good luck! Ours has been out since last August. I'm going to have to bite the bullet and pay to have a Sears repairman come check it out.
  • Apr 15, 2007, 09:10 PM
    CAHummingbird
    Quote:

    Originally Posted by bigdaddy1713
    Hi there our dishwasher quit this week and I need some help. It seemed to quit mid cycle and now the "washing" light is flashing. I've tried turning the power off and back on and nothing seems to work. I of course don't have the manual and Sears likes to keep everything a secret and therefore don't have e-manuals so I am looking for any advise.
    Thanks

    I went through the questions here and found on about page 3 or 4 another person who had the same problem. Someone suggested pressing buttons - hot wash, hot dry 5 times to reset it. Well, just out of curiosity, I went, plugged ours back in (it has been unplugged since last August) and low and behold... it's working!

    Good luck!
  • Apr 20, 2007, 04:08 PM
    bigdaddy1713
    Ours must be a slightly different model as it doesn't have a hot dry button on the front, it has sani rinse and a hot temp scrub buttons but no hot dry button only an air dry one. Any other ideas it may have got the panel wet as we spilled water on the counter and some of it ran onto the panel of the dishwasher. Help I don't want to buy another one and am getting dishpan hands:mad:

  • All times are GMT -7. The time now is 02:35 AM.