I have water marks in between the glass on the door to the microwave. Is there any way to remedy this?

I would not recommend any attempts to repair. If the door is dissembled it must tested for micro wave leaks. Given the cost of a new appliance, the cost parts and the cost of a technician, I recommend replacing.

I will attempt to repair anything but given the risk of a radiation leak, I would not attempt any repair of a microwave other than replacing a fuse.


I assume that by water marks you mean humidity or condensation trapped in the door glass. My Sharp has a plastic cover on the outside of the outer glass. If you GE has such a plastic covering, humidity is most likely trapped between the plastic covering and the actual outer glass of the door.

You could try warming the outer plastic with a hair dryer to evaporate the condensation. Note I said warming. Some hair dryers can get quite hot. Do not over heat and damage the plastic.

Do not disassemble the door.