Hello, I have a intertherm Furnace Model E1EH 015HA. During the 2014 winter the heating elements quit working. I decided to do replace the limit switches, the relay, and the fan relay to see if it would fix the problem and Now I ended up with a bigger problem. As soon as I flip the breaker back to on position the heating elements start instantly. Even when the thermostat is on the off position. It seems to me like I may have crossed some wires. I was very careful not to do that, I replaced components one at a time and switched cable by cable carefully on to the new component. I need help resolving this problem, I would really appreciate it.