Hot water is crossing over into cold water. Do not have a check valve on water heater. Also, do not have any single spigot faucets. How do I test to see if it is happening in/through 1 of my faucets?
![]() |
Hot water is crossing over into cold water. Do not have a check valve on water heater. Also, do not have any single spigot faucets. How do I test to see if it is happening in/through 1 of my faucets?
Do you mean the hot water pipe cross over the cold water pipes?Quote:
Hot water is crossing over into cold water.
So what?
Water heater do not normally have check valves.Quote:
Do not have a check valve on water heater.
How do you test to see if what is happening?Quote:
How do I test to see if it is happening in/through 1 of my faucets?
Close cold water valve located above hot water heater / above cold water inlet. Go to your sink, turn hot water ON for 2 minutes. See if you get continuous water flow after 2 minutes out of the Hot Water side.
Back to you
Milo
| All times are GMT -7. The time now is 08:02 AM. |