My Kenmore Elite dishwashers "add dish" light is stuck on. How do I reset it?

Try pressing and hold for a moment on the START/RESUME button. KENMORE ELITE Dishwasher Owner's Manual, KENMORE ELITE Dishwasher installation guide | L0409010 | ShopYourWay

Here are the reset codes: https://dl.dropboxusercontent.com/u/...t%20codes.docx
https://dl.dropboxusercontent.com/u/...set_Codes.docx
These came from this site and were contributed by others; I did not come up with them.
Here are some manuals: https://dl.dropboxusercontent.com/u/...Dishwasher.pdf
https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
https://dl.dropboxusercontent.com/u/...20Handbook.pdf
https://dl.dropboxusercontent.com/u/...ishwashers.zip
Look at these videos: https://www.youtube.com/watch?v=CQ3hlJAS9M8
https://www.youtube.com/watch?v=flzh...skbLTXDRQN398h (Five Videos)
https://www.youtube.com/watch?v=flzhfmIIYpM
https://www.youtube.com/watch?v=L-bMqVb9kX0
There are several more that may help, but it's not necessary to list them all here. These dishwashers, and many others have had a problem with bad capacitors just like many other electronic devices made in the last 20 years due to Taiwan's manufacturers using a faulty stolen formula to make Japanese capacitors which lacked the final step, unknown to the thief. Capacitors are little electrical storage devices that look like little cans and come in other shapes, too. They are in almost all electronic devices and act as filters to smooth out the power, mostly.