I'm replacing the fan motor on my older Miller outside condenser.
The original motor was no longer available so I purchased a Fasco
Motor with the same specs. The original motor had 3 wires - 2 that went
To the F (black) & C (orange) lugs on the capacitor and one (blue) to
The T2 connection.

With the new motor I'm confronted with 4 wires, 2 with spade
Connectors (brown & brown/white) which are obviously meant to go
To the capacitor (but which wire goes to which lug?) - AND a
Black (hi) & white (com) wires which are just stripped ends.


I only know enough to get myself into trouble, but can you shed
Any light on this?

The motor should show the wiring diagram.

Quote:

---

Originally Posted by ma0641

The motor should show the wiring diagram.

---

And indeed it does... but putting that diagram to practical use, when you have zero (0) wiring skills, is the problem. I need to know where to physically attach each wire.

The question is: brown & brown/white go to the capacitor, but which lug F or C for each? (the diagram does not show, only a generic shape) AND black (hi) & white (com) go where?

Thank you for looking at my dilemma!