Kitchen Aid Dishwasher Model: KTDE204DSSO
Control Light blinks three times whenever I push any of the buttons. I have tried flipping the breaker. Any suggestions?

See if these help: https://dl.dropboxusercontent.com/u/...ishwashers.zip
This is a control board problem: https://www.youtube.com/watch?v=flzhfmIIYpM
https://www.youtube.com/watch?v=XJnzzXJcOV4
https://www.youtube.com/watch?v=81O3GqUlXjw
https://www.youtube.com/watch?v=3mksKp-kTMQ
You will need a meter and to know how to use it: https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
https://dl.dropboxusercontent.com/u/...20Handbook.pdf
https://dl.dropboxusercontent.com/u/...%20Washers.pdf
About one of the best meters for the money can be found at: Commercial Electric Digital Clamp Meter-MS2002 - The Home Depot
Attachment 47387
This meter will help you to work on any electrical equipment in your home as it will test amperage (Clamp), voltage, and resistance (Ohms). Just turn off all power before testing resistance with meter set to "ohms." It sells for $42.38 at Home Depot and you can order it online.