We have built a new home with new well, plumbing, water heater, etc. Our water was very hard and had clear water (ferrous) iron. We solved that problem with a water softener. Now all taps run clear with no iron or metallic taste with the exception of one: the kitchen sink hot water continues to run with a light brown/tan coloring, even when left running for over a minute or two. The taste is fine but the color is there. Other bathroom taps including the showers run clear on cold and when we turn on the hot water in those bathrooms, it runs the same color as the kitchen sink but flows clear after about 5 or 10 seconds. The water softener is brand new and made a significant difference in the quality of water right away. However, the kitchen sink hot water tap remains a mystery. Any suggestions or ideas? Thanks!