I unplugged washer,took off wire harness to lid switch,at terminal at motor I'm conducting continuity test. I'm touching red terminal to pin 6 and black terminal to line on power plug (not N)and getting the same reading 003 regardless of lid shut or not.Multitester reads at 1 at lowest ohm 200 setting when I turn it from off to on. Sounds like lid switch is bad?

Look here: https://www.youtube.com/watch?v=wUSmUSWWIS4 and you will also find more. Here are some manuals: https://dl.dropboxusercontent.com/u/...on-svc-man.pdf
https://dl.dropboxusercontent.com/u/...ice_Manual.pdf
https://dl.dropboxusercontent.com/u/...TWN_Washer.pdf
https://dl.dropboxusercontent.com/u/...oad_Washer.pdf
https://dl.dropboxusercontent.com/u/...c%20washer.pdf
https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
Good luck, it should be easy to fix.