I have a garbage disposal which exit pipe (plastic) is slightly smaller than the trap (plastic). I have tried any kind of plastic fitting, nothing works. What should I do?
Attachment 47286
This is a picture that shows the problem.
![]() |
I have a garbage disposal which exit pipe (plastic) is slightly smaller than the trap (plastic). I have tried any kind of plastic fitting, nothing works. What should I do?
Attachment 47286
This is a picture that shows the problem.
Hello Calimro,
Your picture didn't show try it again, Thanks.
John
As John said, the picture is not accessible, however, my guess is that you are trying to connect the 1.5" TUBULAR plastic garbage disposal elbow to 1.5" PVC... If this is the case, then you need to purchase what is called an 1.5" TRAP ADAPTER (also referred to as an 1.5" desanco fitting). They are readily available at all home improvement stores.
To confirm everything, please repost the picture and we'll see what we think, OK?
Mark
Besides Mark's assumption, I also think you may be trying to fit 1 1/2" garbage disposer drain pipe into 1 1/4" tubular drain pipe. Post photo so we know exactly what set up you have
Back to you
Miilo
All times are GMT -7. The time now is 07:58 PM. |