Hi
Ive brought a new shower the same as my old one (creda Florida plus) but the part where the water goes in is different in pictures just like to know what part I need
ThanksAttachment 47269Attachment 47270Attachment 47271 the old shower is in first picture

http://www.creda-showers.co.uk/media...ht%20shank.pdf

Start with #4 on page 3.

Let me know if this helps.

Yh thanks for that... I got one of my old mates round to do it :)... do you have to flush the pipes out when you fit a new shower.. And what's the best way to

Refer to page 4 of the link I provided,

WARNING: BEFORE CONNECTING THE PIPE WORK TO THE SHOWER, ENSURE THAT THE PIPE WORK IS FULLY FLUSHED OUT.

6. With isolating valve connected, flush the pipe work through to remove any particles etc, before making the final connection to the shower. Blockages in the waterways (particularly the handset and solenoid valve) will prevent the heater working properly. Note: You may be charged for a service call if it is due to incorrect installation.

7. The shower is designed to have an open outlet and should only be used with “Creda”recommended fittings. Do not connect the handset until after the shower front cover and corner section are fitted.