Our GE oven JT910SOA3SS will not turn off. All the touch pads work, except for the clear. To get the oven to off, we need to turn the breaker off. Do I need to replace the Wall Oven Touch Pad and Control Panel Assembly, plus, Control Panel, or just one of them. The oven is 13 years old and the touch pad went out before during warranty. Thanks for all help!

I have a GE profile wall oven that is about the same age. We had a kind of the same problem. What they had to with ours is replace the motherboard located behind the touch pad. I don't think you would need to replace the touch pad.

Probably not cost efficient to repair a 13 yr old oven. When (if) you can get the parts, disassemble the oven, repair etc. you have approached the cost of a new one. I just had a similar issue with an older GE oven-22 yrs. old. After all pricing, I was able to put a new one in for less than a $250 differential.

I found an old manual on that oven: https://dl.dropboxusercontent.com/u/...le%20Ovens.pdf
And some other manuals: https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
https://dl.dropboxusercontent.com/u/...20Handbook.pdf
https://dl.dropboxusercontent.com/u/...point_Oven.pdf
https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
It depends entirely on what you find wrong in this oven whether it is worth repairing. Ovens have little to go bad in them and if you can repair it there is little that will go out in the next ten years, probably, except an element or two.