Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Have installed heat and cool thermostat from instructions, won't work. What can I do? (https://www.askmehelpdesk.com/showthread.php?t=807397)

  • Jan 23, 2015, 06:47 PM
    Lawrence Dauber
    Have installed heat and cool thermostat from instructions, won't work. What can I do?
    Lux T10-1143SA. I installed it by the instructions, but doesn't work. Can anyone help? This is a heating and cooling thermostat
  • Jan 23, 2015, 07:06 PM
    talaniman
    Did you try this?

    http://www.menards.com/main/store/20...1143SA_ENG.pdf

    Quote:
    NOTE;
    If you have an electric system and the blower does not operate after installation, find the factory installed yellow wire currently attached to the “Y” terminal and move it to the “A” terminal on the sub-base
  • Jan 23, 2015, 09:10 PM
    Grady White
    Did you turn off the main power to the furnace before working on the stat wires? If not, you may have blown a fuse in the furnace or fried the control transformer.

    • All times are GMT -7. The time now is 01:24 AM.