I Need To Remove The Inside Panel Of A Sided-by-side Refrigerator To Work On The Water Valve Of The Indoor Water/ice System. How Do I Remove The Seal (I See No Screws Like There Used To Be)? Is It Glud On And If So How Do I Repace It When Im Finished?

What brand is it? How old? And a model number would be helpful!

Sorry for lack of detail - I figured all were the same.
GE
Model - GSL25J5PABS
Serial # - 253557
4yrs old
Thanks

I looked on a parts line drawing for that model and it's very difficult to see exactly how it's attached. Most of the ones I've taken apart have 1/4" sheet metal panhead screws under the door gasket. They are not glued on. After you find them and make your repairs, don't just tighten the screws up. You have to slightly snug them up and align the door, then tighten, but NOT over-tight, otherwise you will crack the plastic door liner.