Hello, I have Kenmore dishwasher mod. Number 66516022403. I went on a trip and turned off the water in my house. When I came back and turned the water back on, my dishwasher would not start. I tried resetting it by pushing Hi Temp Wash and Heated Dry and all the lights on the control panel lit up and it went through the test cycle but I am unable to cancel it. When it completes the test cycle, the buttons are unresponsive again except for the Hi Temp Wash and Heated Dry.

It sounds like you have a stopped up water line. Check the inlet screens on the water valves. Here are some manuals: https://dl.dropboxusercontent.com/u/...ishwashers.zip
https://dl.dropboxusercontent.com/u/...Dishwasher.pdf
https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
If the line is clear then you will need to check some things with a meter.