Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Electrical & Lighting (https://www.askmehelpdesk.com/forumdisplay.php?f=105)
-   -   Problem with hampton bay ceiling fan & light (https://www.askmehelpdesk.com/showthread.php?t=796101)

  • Jul 6, 2014, 08:50 PM
    112748lft
    Problem with hampton bay ceiling fan & light
    I have 2 Hampton Bay ceiling fans on my outdoor patio. They were installed by a licensed electrician. The box on the side of the house when opened shows them labeled A & B also the remotes are labeled A & B

    B is working just fine. I changed the batters in the A remote due to fact the light and fan were not turning on. It is still not turning on by remote. The LED on the remote is lighting and registering what I am asking it to do. On fan A I have a pull cord also. When pulled it does turn on and off. There is not pull cord on the light fixture to test.

    How do I test the sensor on the wall unit to see if it is bad?

    Could it be another problem? Suggestions please
  • Jul 11, 2014, 07:02 AM
    donf
    Does the remote have a series of switches on it? These are called "Dip Switches". If even one of those switches has been changed, the remote will transmit of a different freq. than the receiver inside the fan and the transmission will be ignored.
  • Jul 11, 2014, 07:46 AM
    hfcarson
    If something is not working you should call the installer...it is his responsibility to make
    his installation work properly. There should also be a 1 year warranty on parts and labor.

  • All times are GMT -7. The time now is 07:26 PM.