Cleaned the trap , nothing in there, checked the hose and it is clear , replaced the pressure switch which cost me 150 dollars, still getting the F35 Code. I am ready to crush this machine with my backhoe , any advise , did I mention the warranty just ended. F--- Whir-pool

Here are some manuals: https://dl.dropboxusercontent.com/u/...%20washers.zip
You did not say what kind of washer you had.

Yes! We have an answer finally. After all the trial-n-error suggested by everyone we replaced that sensor and 6 months later F35 came back. So we got another one and this time FAIL. After more searching there is a website showing how to pull out the mother board and sure enough we had 2 bad capacitors! Husband is replacing them now. Capacitors when going bad even on a computer mother board causes intermittent stupid errors. The YouTube video of the replacement was wonderful! The capacitors cost $1.25 here in LA. Good Luck!

Quote:

---

Originally Posted by drtom4444

Here are some manuals: https://dl.dropboxusercontent.com/u/...%20washers.zip
You did not say what kind of washer you had.

---

The F35 is on the wonderful delightful Whirlpool Duets.