The fill valve inside the toilet tank seems to make a lot of noise running all the time. Is there a fix without replacing the device?
Thanks
![]() |
The fill valve inside the toilet tank seems to make a lot of noise running all the time. Is there a fix without replacing the device?
Thanks
sure there is! Now tell me what fill valve is yours. Back to you, TomQuote:
Is there a fix without replacing the device?
Hi Tom... Looks most like the valve listed as 2
You have a washer that needs to be re-seated. Turn the water off to the toilet tank and pull the lid. Unscrew the three screws on top and pull up. Reverse the washer and reseat it back in firmly. Now, place a pan over the open valve and turn the water back on to flush out the supply. Reassemble and test. Good luck, Tom
Good morning... I have an older toilet... the filler valve has four screws on the top. May I assume that is what I should be looking at?? I am a total amateur.
Cheers
Yes! Remove the screws and follow directions. Good luck, Tom
All times are GMT -7. The time now is 12:26 PM. |