I'm working on a 1997 honda accord with a 2.2. I replaced the engine with another engine from a 97 also... *** note the other engine did not have a crank or cylinder location sensor behind timing components so I swapped everything from one to the other to all the sensors to be run on the engine I have installed now... Problem the engine starts and fires up but immediately looses injector pulse that being said it still has spark and the fuel pump continues to run... I have checked to insure it was not spark issue or a fuel pressure issue... the engine will run if I fuel it through the intake with gas from a sprayer so I know its something killing the injector pulse... Ive tried another ecu but no change... I have NO codes in the car to indicate any issue with the crank signal... there is a security light but the bulb must be bad because it doesn't come on at all... no matter the key position... IM STUMPED any help would be great