I having problems with my Honda crv 2003. It suddenly stop when I was going to my job. Then I took off a tire and hit the caliper and disconnect the abs cable but the problem persisted. If somebody can tell me how to repair this problem please tell me. Please

Antilock system some times activate when it's not suppused to

Try cleaning and greasing the caliper pins with silicone grease (regular high temperature grease will dry out and bind). Honda only recommends silicone grease--don't experiment. Also, make sure the brake pads fit properly and don't bind. Clean everything with brake cleaner. If they bind, file the "ears" as needed. Should the problem persist, the square-cut seal inside the caliper is not retracting the piston, likely due to corrosion. In this case, you should install a remanufactured caliper. Afterwards, change the brake fluid and bleed the brakes in this order: RR, LF, LR, and RF. The keys to trouble-free brakes are cleaning and lubricating the caliper pins with silicone grease, using premium ceramic pads, and changing the ABS brake fluid every 2 years.