Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Cars & Trucks (https://www.askmehelpdesk.com/forumdisplay.php?f=41)
-   -   Can a 8.66 Disc diameter 8.66 in 24 teeth, 5.91 in. inner diameter fit a 91 accord dx (https://www.askmehelpdesk.com/showthread.php?t=790435)

  • Apr 24, 2014, 10:26 AM
    ttc249
    Can a 8.66 Disc diameter 8.66 in 24 teeth, 5.91 in. inner diameter fit a 91 accord dx
    can this clutch fit 91 accord dx
  • Apr 24, 2014, 10:36 AM
    smoothy
    DO the part numbers match... you can look them up online. Honda doesn't duplicate part numbers on idential parts....they have a pretty efficient numbering system.
  • Apr 24, 2014, 12:32 PM
    TxGreaseMonkey
    For $56, I installed a brand new Perfection Clutch Kit in a Honda, which included the clutch and pressure plate, release bearing, pilot bearing, and alignment tool. Why not go new, when aftermarket clutch kits are so cheap and so good? Then, you will be getting all of the bearings that should be replaced and the all-important alignment tool. It's a lot of work to go through, if it doesn't work out and if you are not replacing the bearings. Be sure to use Honda Super High Temperature Urea Grease, when you lubricate the splined input shaft, annular groove, and pivot points.

  • All times are GMT -7. The time now is 03:20 AM.