Installed new outlets and all of the switches are not working
We changed out the off white outlets for white outlets. Followed directions to a "T" - not all of the switches had the "land" wire attached to them previously so we copied what was done. Now a whole row of lights do not work and two on a row of three lights do not work.
We tried to "bridge" the land wire to each light switch (with the power on) we got a spark but the switches are not controlling the lights coming on and off - just when the wires are touching.
We are also trying to install a light fixture that is hooked up as the directions state but it is controlled by one of the light switches that is not working.
Please help!