Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Franklin electric submersible motor (https://www.askmehelpdesk.com/showthread.php?t=783499)

  • Feb 4, 2014, 06:11 PM
    Skipperd1
    Franklin electric submersible motor
    I have a franklin sub-pump and the motor won't run. I'm on generator power, when I try to start it it Boggs down almost till it dies. I pulled it out of well and torn it down. The stator housing has a plug hole with three posts. When I check continuity between them, all three are in contact with each other? Does this mean the windings inside have melted together or to metal housing? Motor is franklin 3/4 hp 230 volt 6.8 amp, 55kw, single phase model #2145079004 please help!
  • Feb 4, 2014, 06:58 PM
    ma0641
    Hope it is not 55KW.
  • Feb 4, 2014, 09:16 PM
    Skipperd1
    Haha sorry .55 kW

  • All times are GMT -7. The time now is 09:24 AM.