I recently purchased a TV tuner, installed it and got it working. Well, mostly anyway. I realized after I started the program up that I forgot to connect to audio cable form the TV tuner to the Audio Line-In jumper on my ECS 741GX-M motherboard. So I cracked the case back open and then found out I can't find the damn Audio Line-In jumper on this thing. The manual and manufacturer's website are no help.

So my question, is the Audio Line-In the jumper that the audio ports are plugged into? Or are we talking about a different jumper all together? Because if it's the same, then how am I supposed to plug in the TV tuner AND the speaker port, because it doesn't me no good to plug the Tv tune rin if I can't plug in speakers to actually hear the sound. Any help would be appriciated, even if you can only direct me to a website that has a jumper map for the 741GX-M. Thanks.

Don't know if this will be any good,but at http://www.directron.com/741gxm.html you will find the ECS 741GX-M Motherboard info.

Go to the bottom of the page,and look at the 'space' where you can ask a question (sound familiar? ).Other than that,look on the left side of the page,and browse through all the categories listed there.

Sorry I can't be more helpful,but what I know about motherboards would'nt fill a postage stamp! :D


All the best in your search,
Nez.

Are you sure its talking about a jumper? My sound board has a line in jack a mic jack and a speakers jack.. MY TV tuner board has a patch cable that plugs into the Line In jack.