Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Popup stopper (https://www.askmehelpdesk.com/showthread.php?t=779910)

  • Dec 27, 2013, 02:59 PM
    WebsterJDuck
    1 Attachment(s)
    Popup stopper
    Does anyone know where to find a pop-up stopper like this. I have about 10 of these (bronze and chrome) in my house. Inner most seal is about 1-1/4" in dia and the top most piece in 2-1/4" in dia.

    Apologies for the gross picture. To make up for it I put it on a pretty card.

    imgur: the simple image sharer

    imgur: the simple image sharer
  • Dec 27, 2013, 03:23 PM
    speedball1
    Why not simply replace the old one? I just came from eBay where they have lots of bronze lavatories, pop ups. Just ask. Good luck, Tom
  • Dec 27, 2013, 05:48 PM
    WebsterJDuck
    Thanks. Because the fit is odd, I'd have to change the flange and pop-up. This is a poor design and leaves the underlying flange in bad shape. I'm hoping to postpone this until I have more time. Any pop-up dimensions I can find would leave the marred up flange exposed. I may have to bite the bullet and change it to something standard
  • Dec 28, 2013, 12:51 AM
    Milo Dolezal
    Usually, the stopper is part of the drain assembly and requires a stopper made by the same manufacturer to fit the drain... Sometimes you can use generic replacement stopper from Box Store and it may work OK. Don't be surprised if you will have to replace the entire drain assembly. Every new drain assembly comes with its own stopper. Back to you. Milo

  • All times are GMT -7. The time now is 03:07 PM.