Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Tools & Power Equipment (https://www.askmehelpdesk.com/forumdisplay.php?f=334)
-   -   Briggs Stratton engine will not start (https://www.askmehelpdesk.com/showthread.php?t=778698)

  • Dec 14, 2013, 10:41 AM
    twoglue
    Briggs Stratton engine will not start
    I have a 3.5hp B&S edger, engine will not start. I cleaned out the carburetor, and gas tank. New plug as well. It fires but will not stay running?
    Help
  • Dec 14, 2013, 10:43 AM
    twoglue
    I have a B&S 3.5hp edger and the engine will not start. I cleaned out the carburetor and gas tank, as well as put in a new plug. Its starts but sputter out and will not continue to run.
  • Dec 14, 2013, 06:45 PM
    crigby
    Hi,
    It would depend on the exact engine as to whether your machine uses engine vacuum alone to feed the fuel or utilizes a diaphragm to pump it into a reservoir. Please provide the engine numbers, usually point upwards on the blower housing. Should probably be a five digit Model, hyphenated six digit Type and eight digit Code.
    Peace,
    Clarke

  • All times are GMT -7. The time now is 12:26 PM.