My control panel is not lighting up or working, is there a reset button or something? I did check the breaker box to make sure it is on.

You could have a bad thermal cutout or any of several problems. See: http://www.rcappliancepartsimages.co...2-00651732.jpg
You will need to get a meter and start tracing the power from where it comes in to where it fails. It sounds like a hard job, but it's really an easy thing to do.Here are some manuals that are close to your model: (Kenmore and Bosch are the same now)
https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
https://dl.dropboxusercontent.com/u/...viceManual.pdf
https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
https://dl.dropboxusercontent.com/u/...t%20Codes.docx
https://dl.dropboxusercontent.com/u/...ishwashers.zip
https://dl.dropboxusercontent.com/u/...mal_Cutout.pdf