1997 7.3 lifer diesel. It franked and ran for about 10 min. The filter housing was emptied to bottom of filter. Refilled, still won't crank...
![]() |
1997 7.3 lifer diesel. It franked and ran for about 10 min. The filter housing was emptied to bottom of filter. Refilled, still won't crank...
I have located part of my problem... still need tons of help. Directly behind the filter vessel is a small device (no clue what its called) that is attached to the filter housing by a small, 2" tops, on the passenger side of vehicle, at the very bottom of this part, there appears to be a brass endcap of some type. I finally got the truck franked and running but had fuel pouring out . This brass? Fitting is the culprit. Can I dry it, clean it, and cover it with JB Weld until I can get it replaced?
All times are GMT -7. The time now is 12:27 PM. |