Have Kenmore Elite Quiet Pak 4, front loader that will not allow water to come in from intake hoses

Probably stopped up filter screens. Remove hoses and clean the screens after pulling them out first. Make sure to replace them. Look at these: https://dl.dropboxusercontent.com/u/...c%20washer.pdf
https://dl.dropboxusercontent.com/u/...sher_Elite.pdf
https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
You could also have a bad solenoid coil, water level control, or water inlet valve. You will need to use a meter to find out.