Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Electrical & Lighting (https://www.askmehelpdesk.com/forumdisplay.php?f=105)
-   -   Service (https://www.askmehelpdesk.com/showthread.php?t=770270)

  • Oct 6, 2013, 08:46 PM
    Mrgoat13
    Service
    Ok got a question, I installed a service meter/combo Midwest trailer. Anyhow I was going take 20amps off it to power the septic pump since the panel accepts four breakers well the inspector rip me a new one and said I couldn't do it that way everything has to be feed from inside. Is he right? I tried looking it up in 2008 but couldn't find anything. I didn't see a problem doing it that way. What's your thoughts
  • Oct 6, 2013, 08:56 PM
    Mrgoat13
    Here's a pics of what I'm talking about

    Meter Sockets - Breakers, Distribution & Load Centers - Electrical at The Home Depot
  • Oct 7, 2013, 04:00 AM
    stanfortyman
    He is totally wrong. That is exactly what those breaker spaces are there for.

    Obviously he did not cite a code for failing this, right?
    Ask him what section of the code it violated. If he says anything even remotely like "I just don't like it", or "I'd rather see...", then he is over stepping his authority.
  • Oct 7, 2013, 06:22 AM
    ma0641
    I run 2 breakers off mine, outlets and a run to the garden house.
  • Oct 7, 2013, 11:25 AM
    Mrgoat13
    No he didn't say any codes he just kept say its for services only. I didn't think I did anything wrong but boy was he mad about it
    QUOTE=stanfortyman;3564706]He is

    Totally wrong. That is exactly what those breaker spaces are there for.

    Obviously he did not cite a code for failing this, right?
    Ask him what section of the code it violated. If he says anything even remotely like "I just don't like it", or "I'd rather see...", then he is over stepping his authority.[/QUOTE]
  • Oct 7, 2013, 11:50 AM
    stanfortyman
    Quote:

    I didn't think I did anything wrong but boy was he mad about it
    Mad? Seriously?

    The guy has no clue then.

  • All times are GMT -7. The time now is 03:58 AM.