My washer washes but when it comes to draining or spinning it stops

Look at this: https://dl.dropboxusercontent.com/u/...c%20washer.pdf and get a meter. You will need one. Here's a manual: https://dl.dropboxusercontent.com/u/...e%20Manual.pdf

Quote:

---

My washer washes but when it comes to draining or spinning it stops

---

Have you checked the motor drive coupling?

The part that your talking about is it the dial that you pull out to start your load?

Quote:

---

Originally Posted by ;

The part that your talking about is it the dial that you pull out to start your load??

---

No, the part I'm talking about is underneath, it connects the motor to the drum. Looks something like this.

Quote:

---

Originally Posted by parttime

No, the part I'm talking about is underneath, it connects the motor to the drum. looks something like this.

---

no I think it's the knob

no I think it's the knob

Swaneks, that knob of which you speak very rarely is a problem. Does the machine make any noise when it should be spinning? Lid switch could be bad and need checked with a volt/ohm meter.

Often the coupling is bad, and you often can find pieces of it underneath and in the center of the machine of look with a flashlight.

P.S. It would help some to know the name and model number.