Has anyone got a wiring diagram for the creda sensair tumbledryer timer model 37653E?

Thanks

Creda and GE are about the same, in fact, they have merged. Here are GE diagrams where you should be able to find a match: https://dl.dropboxusercontent.com/u/...%20Manuals.zip
What problems are you having?

Quote:

---

Originally Posted by drtom4444

Creda and GE are about the same, in fact, they have merged. Here are GE diagrams where you should be able to find a match: https://dl.dropboxusercontent.com/u/...%20Manuals.zip
What problems are you having?

---

Thanks for your help.

I have had a quick look at the diagrams and I hope to get a proper look later. At present I could not locate the timer I was hoping for.

The problem is that I replaced the drive belt and in doing so I pulled a wire off the timer that appeared to be live. I reconnected it to what I thought was an appropriate terminal - everything now works apart from the heaters.

Thanks again
tomarnuk

You will now have to use a meter to find out how to wire it, or maybe if you will look very close with a magnifying glass you can see the scratches where the wire connector was plugged on the terminal. I have had to do this at times.