I cannot find the learn button on my Stanley garage door opener model 3500 51. I need it to program a new remote control.

I would go to the Website for Stanley... look up your particular garage door opener... and download the user manual or guide which you can print out and keep someplace safe. As it will provide t he answers to almost any question you have about this.

Quote:

---

Originally Posted by smoothy

I would go to the Website for Stanley...look up your particular garage door opener...and download the user manual or guide which you can print out and keep someplace safe. As it will provide t he answers to almost any question you have about this.

---

Thank you smoothy, I will do that.

Til you get the Manual which will also be helpful in programming, If not at the rear of the operator, it may be under the cover where the bulb is.

Quote:

---

Originally Posted by Stratmando

Til you get the Manual which will also be helpful in programming, If not at the rear of the operator, it may be under the cover where the bulb is.

---

Thank you Stratmando I will try that right now.