Where is the Receiver box on the Harbor Breeze 52" Merrimack Ceiling Fan, so that we can change the dip switches and be able to operate them individually. Thanks!

Everyone I have seen is located under the ceiling mount cover. Yours may be different but all of mine, 3 different fans, are under the top ceiling mount cover. If it is a close mount fan, you will probably have to remove the blades, drop the cover and re-install the blades.

Figured this one out. There is no DIP switch it is automatic. See page 20 of manual. It is a little confusing though. Change the dip switch in the remote to what you want. Turn the fan off at the wall switch for about a minute. Turn it back on then within 30 seconds press both the fan off button and light button on the remote at same time for at least 5 seconds. When the fan and remote are programed together the fan light will blink. Real easy once done! Good luck...