Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   York Furnace model: P2MP Circulator Blower Won't Work (https://www.askmehelpdesk.com/showthread.php?t=751397)

  • May 30, 2013, 11:48 AM
    Auburnskydive
    York Furnace model: P2MP Circulator Blower Won't Work
    I went through the troubleshooting charts in the 'Installation Instructions'.

    The FAN CHECK ONLY flow chart indicated the thermostat was bad. Replaced thermostat. A/C compressor comes on-no blower. Heater lights fine & finally shuts down-no blower.

    COOLING CYCLE CHECK and MAIN BURNER troubleshootin flowcharts indicate bad module even though the FAN ONLY CHECK still shows a bad thermostat.

    ARRGGG! '

  • All times are GMT -7. The time now is 02:32 AM.