I have a Kenmore Elite Gas Dryer model number 110 72056 100. When I select a cycle to dry; they dryer turns, the air is blown out of the house; :confused: however, it is cold air even though I have selected a hot air cycle.

Please let me know if you know what could be wrong with this.

[email protected]

Try this... Epinions.com - Posts in Sears Kenmore Elite Dryer Won't Run If Start Button Released

Diagnostic Guide Link
I found service tech diagnostic guides (PDF format) during an online search. This includes instructions on putting the dryer into test mode in order to check switches, etc. Here are the links:

Gas Dryer:
http://www.servicematters.com/docs/w...%203980053.pdf

Electric Dryer:
http://www.servicematters.com/docs/w...%203979705.pdf

Quote:

---

Originally Posted by erooni

I have a Kenmore Elite Gas Dryer model number 110 72056 100. When I select a cycle to dry; they dryer turns, the air is blown out of the house; :confused: however, it is cold air even though I have selected a hot air cycle.

Please let me know if you know what could be wrong with this.

[email protected]

---

What was your dryer problem. I have one with the same problem.

First, I got this thing free on craigslist, it is a kenmore elite king size gas dryer. It would kind of get warm for a few seconds then not. It took me 2 months of looking but I found the answer on epinions.com. It took me 10 minutes to fix. As it turns out, the dryer was over heating and automatically shutting off the heat. All I had to do was make sure my vent was clear. And the front kick plate [panel] under the door I snapped off [it snaps on] and removed 4 screws to the air chamber right in front and vacuum out the air chamber. It was clogged. I reassembled and it has been working great ever since. Now I got an $1100.00 gas dryer free.
If you go to epinions.com be aware, they are not g rated.

Thanks for the quick reply. As I am a craigslist junkie myself. I will try clean it out and then I will go from there. Thanks Again.