When I came home from work today I noticed that the water in the toilet bowl was significantly less than it should be. There is not water leaking on the floor and the tank appears to be operating the right way. I have a dual flush toilet. I flushed it and it was not a normal flush. Flushed it a couple more times, seemed to be working right. But it is still losing water in the bowl, any suggestions?

Hi Jerksicow

Yes, take the lid of the toilet tank and check to see if a 1/4" flexible tube has come loose from the 1" overflow tube in the center of the tank. If the small tube has dislodged from the bigger tube, reconnect the smaller tube to the center tube and that should resolve your issue!

Good luck!

Mark

Hi jerksicow and welcome to The Plumbing Page at AMHD.com. You're responding to a 7 year old dead threads so I gave you one of your own. Please check the date before you post. Thanks
Does the bowl fill normally an d then lose water or does it just not fill when flushed? Back to you, Tom
It