Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Electrical Engineering (https://www.askmehelpdesk.com/forumdisplay.php?f=497)
-   -   Can you put brass cable glands on Aluminimum armour cable (https://www.askmehelpdesk.com/showthread.php?t=748187)

  • May 9, 2013, 03:04 PM
    Steve1560
    Can you put brass cable glands on Aluminimum armour cable
    Can you put brass cable glands on Aluminimum armour cable
  • May 13, 2013, 02:02 PM
    hfcarson
    In the USA, the Electrical Code requires anything electrical that is installed must be "listed and labeled" for the application and installed according to the manufacturers installation instructions... NEC 110.3(B)
    If you are outside the USA the above requirement is still a good start...

    • All times are GMT -7. The time now is 01:22 PM.