Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Plumbing (https://www.askmehelpdesk.com/showthread.php?t=746048)

  • Apr 25, 2013, 03:05 PM
    dkaminski
    Plumbing
    Can I drill into the cast iron cap on the clean out trap to remove the nut?
  • Apr 25, 2013, 03:14 PM
    speedball1
    Are you the same person that has a CI cover stuck in the sewer pipe or are there two of you? Back to you. Tom
  • Apr 25, 2013, 05:21 PM
    ballengerb1
    Should we assume you have already tried a large pipe wrench with no luck? I can't see how drill a hole in the cap will be of much help unless you drill out almost the same size as the plug. If a cast iron cap is that snug I'd get a sharpe cold chisel and start breaking the cap from the center, once you chop out a large hole then you can collapse the plug by hitting from the side driving the O shape into a C shape

  • All times are GMT -7. The time now is 01:54 PM.