Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Networking (https://www.askmehelpdesk.com/forumdisplay.php?f=76)
-   -   IP address (https://www.askmehelpdesk.com/showthread.php?t=744242)

  • Apr 14, 2013, 09:34 AM
    Roger1100
    IP address
    What is the best way to configure IP CAMERAS for use them through Internet Web network
  • Apr 14, 2013, 10:36 AM
    Curlyben
    Firstly you will need to open appropriate posts in your own firewall to allow the camera to see the net.
    After that it's simply a case of attaching them to your own network with what ever address range you use.
  • Apr 14, 2013, 01:30 PM
    jolly1967
    1. Check if your isp gave you a static ip

    2. If ip is dynamic... configure a dydns to ponit to your ip

    3. Check which port the ip cameras use

    4. Forward ports on your router to your internal ip address for you cameras
  • Apr 15, 2013, 08:14 AM
    InfoJunkie4Life
    Ideally...

    You need to configure each camera to have a separate IP address and Port from all of the other cameras. It would be wise to put the IP address outside of the DHCP range and the ports above 1024. This will prevent clash from other automatic devices on the network.

    Next you need to configure your firewall to forward a specific port to its corresponding IP address. Then when you go to your web browser off-site you can type in
    Each port number giving you a separate camera.

    jolly1967 has a point. If you want to make it easier assign a domain to your IP address and if its dynamic, a service such as dyn.com could help you.

  • All times are GMT -7. The time now is 10:19 PM.