Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Does a broken brass clip affect a single lever bath tub faucet (https://www.askmehelpdesk.com/showthread.php?t=736659)

  • Feb 28, 2013, 10:22 AM
    trina1976
    Does a broken brass clip affect a single lever bath tub faucet
    Does a broken brass clip effect a single lever bath tub faucet
  • Feb 28, 2013, 10:29 AM
    trina1976
    Does a broken brass clip affect a single lever bath tub faucet
    The cold water line is continuously trickling water in my delta single lever bath tub faucet what is wrong with it?
  • Feb 28, 2013, 10:49 AM
    ballengerb1
    Is this a brass clip on a Moen valve? Sure a broken part can cause a leak, the clip is likely what holds the cartrdige fully in place.
  • Feb 28, 2013, 04:23 PM
    massplumber2008
    Hi Trina

    What brass clip? Curious as to exactly what you refer to here as a brass clip is not common to Delta, but is to Moen..

    Either way, if your cold water is dripping then most likely the CUP WASHER and spring under the delta cartridge need to be replaced. This is usually a pretty simple job if you know how to disassemble the valve... ;)

    Check out this video and see if it helps:



    Back to you...

    Mark

  • All times are GMT -7. The time now is 05:50 PM.